Zapi AC-2 User Manual download pdf (Page 51)

AF2ZP0CE - ACE2 350/450 - User Manual Page - 51/83

8) RELEASE BRAKING

Seconds. It controls the deceleration ramp when the pump request is

released. The parameter sets the time needed to decelerate the traction

motor from 100Hz to 0Hz.

9) MAX SPEED LIFT

It determines the pump maximum speed when LIFT ENABLE switch is

closed .

10) 1ST SPEED COARSE

It determines the pump maximum speed when SPEED1 switch is closed .

11) 2ND SPEED COARSE

It determines the pump maximum speed when SPEED2 switch is closed .

12) 3RD SPEED COARSE

It determines the pump maximum speed when SPEED3 switch is closed.

13) HYD SPEED FINE

It determines the pump maximum speed when an hydraulic steering function

request is received via CAN BUS.

14) CUTBACK SPEED 1

Speed reduction when the cutback input is active.

15) FREQUENCY CREEP

Minimum speed when the LIFT ENABLE switch is closed, but the accelerator

is on a minimum position.

16) MAXIMUM CURRENT

This parameter changes the maximum current of the inverter.

17) AUXILIARY TIME

Time units value (seconds). For the encoder version, is the delay when an

hydraulic steering function request is switched off.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 82 83

No comments

Zapi AC-2 User Manual Page 51